{{VIP.loyaltyProgramCardNumber}}

VIP Club Homepage

{{ navItem.name }}
{{navItem.name}}
NEW!
{{ subItem.name }}
Search for Locations Within 500 Miles
No results found
 

How to Remove a Tail Light Assembly from a Toyota Camry

Applies to: TOYOTA CAMRY (2000)

Check out our helpful video detailing the instructions for removing a Toyota Camry tail light on 2000 Toyota Camry models. We have listed out step-by-step instructions as part of our Toyota Camry tail light assembly removal guide. You can print these instructions at home before you visit the yard.

2000 Toyota Camry

Pull Tip: Once you remove the lights, if the seals between the assembly and the sheet metal are still in good shape, remove and use them as well.

Estimated Pull Time: 15 Minutes

Recommended Tools

  • Phillips Head Screwdriver
  • 10mm Socket
  • Ratchet Extensions
  • Ratchet

Instructions

  • 1

    Remove fasteners from inside of the trunk using a Phillips screwdriver

  • 2

    Pull the plastic trim panel off

  • 3

    Disconnect electrical wires by squeezing in on sides

  • 4

    Remove three 10mm nuts for each light you are removing

  • 5

    For the taillight assembly mounted on the truck, partially remove the trunk liner cover

  • 6

    Remove electrical connectors as above and remove fasteners using 10mm socket

  • 7

    Remove final fastener on outside corner of trunk - you should now be able to remove the assembly

New To Pull-A-Part? Learn The Process

OR