How to Remove a Starter from a Toyota Camry

Applies to: TOYOTA CAMRY (2000)

2000 Toyota Camry

Estimated Pull Time: 20 Minutes

Recommended Tools

  • Use a ratchet to make your repair with help from Pull-A-Part. Ratchet
  • Ratchet Extensions at Pull-A-Part Ratchet Extensions
  • image of needed socket pull tool at Pull-A-Part Socket

Instructions

  • 1

    Disconnect battery cables and place to the side

  • 2

    Disconnect the starter connector by pressing in on the side

  • 3

    Remove the 14mm bolt from each side of the starter

  • 4

    Pull the starter out of its housing and rotate it to expose the bottom

  • 5

    Remove rubber boot over 12mm bolt and loosen using ratchet

  • 6

    Slide cable off, grab starter and work it out of the engine compartment

New To Pull-A-Part? Learn The Process

OR