How to Remove a Front Bumper From a Toyota Camry

Applies to: TOYOTA CAMRY (2000)

2000 Toyota Camry

Pull Tip: Use a plastic trim stick to peel the fender liner back to give you access to the 10mm bolts.

Estimated Pull Time: 20 Minutes

Recommended Tools

  • Plastic Trim Tool at Pull-A-Part Plastic Trim Tool
  • image of needed socket pull tool at Pull-A-Part 10mm Socket
  • Ratchet Extensions at Pull-A-Part Ratchet Extensions
  • Use a ratchet to make your repair with help from Pull-A-Part. Ratchet

Instructions

  • 1

    Remove three 10mm bolts from top edge of bumper cover

  • 2

    Remove 10mm bolts from under fender liner on both sides

  • 3

    Remove three 10mm bolts from underside of each side of the bumper cover

  • 4

    Unsnap bumper cover from a mount that's attached to the front fender by grabbing the front and pulling forward on both sides

  • 5

    Remove the bumper cover from the vehicle

New To Pull-A-Part? Learn The Process

OR