Applies to: TOYOTA COROLLA (1995-2000)
Disconnect the upper radiator hose with the pliers by removing the metal clamp and slide the hose off.
Do the same thing on the smaller bleed line right next to it.
Take two upper brackets off by removing the 4 bolts holding them in place.
Once those are out, disconnect the two electrical connectors going to the radiator fans, one on the driver's side and one on the passenger's side.
Move underneath the car and remove the lower radiator hose (this is the same process as the upper hose, just a pair of pliers to slide the metal clamp off)
Disconnect the smaller lines going to the transmission: a.The first one will be right next to the large lower radiator hose. b.The second one is hidden behind a plastic cover. Pop off a few of the bolts holding it in place and then disconnect the other small line the same way.
Once those lines are all disconnected the radiator should be free - remove it from the vehicle by lifting it up and out.