{{VIP.loyaltyProgramCardNumber}}

VIP Club Homepage

{{ navItem.name }}
{{navItem.name}}
NEW!
{{ subItem.name }}
Search for Locations Within 500 Miles
No results found
 

How to Remove a Window Regulator from a Dodge Stratus

Applies to: DODGE STRATUS (2001-2006)

 

Check out our helpful video detailing the instructions for removing a Dodge Stratus window regulator on 2001-2006 Dodge Stratus models. We have also provided a step-by-step guide as part of our Dodge Stratus window regulator removal instructions.

This guide applies to 2001-2006 Dodge Stratus models

Estimated Pull Time: 10-15 minutes

Recommended Tools

  • 8mm Wrench
  • Phillips Head Screwdriver
  • Flathead Screwdriver

Instructions

  • 1

    Remove window to access the window regulator (window pull and how to create power on the yard below)

  • 2

    Once the window is removed or supported, we need to remove these three 8mm nuts in the lower left hand corner. These are what keep the power window regulator in place.

  • 3

    After removing, pull the regulator up and unplug the electrical connector from the bottom (these can be stubborn and a small screwdriver can make this easier).

  • 4

    Once that clip is out, we can pull the regulator from the door.

New To Pull-A-Part? Learn The Process

OR