Search for Locations Within 500 Miles
No results found
Applies to: VW All Models (All Years)
T-20 Torx Driver
Remove the plastic cover which will give you access to the T20 release screw for the exterior door handle
Hold the exterior door handle open the entire time that you are working on it
With the door handle held open, use the T20 driver and put it into the release screw and turn it exactly twelve turns. Start with the tool logo facing 12 o’clock so it easy to count the number of rotations
When you release the door handle, it should stick out a little bit. Tap the handle door closed and pull the door lock cylinder out of the door
Pull the handle out again and you will be able to see there is a cable attached to it. This is the cable that attaches the exterior door handle to the door lock actuator. Take that cable off and move it out of the way
Slide the door handle to the back and pull it out and swing it out towards the front of the car
Remove the plastic cover which will give you access to the T20 release screw for the exterior door handle
Hold the exterior door handle open the entire time that you are working on it
With the door handle held open, use the T20 driver and put it into the release screw and turn it exactly twelve turns. Start with the tool logo facing 12 o’clock so it easy to count the number of rotations
When you release the door handle, it should stick out a little bit. Tap the handle door closed and pull the door lock cylinder out of the door
Pull the handle out again and you will be able to see there is a cable attached to it. This is the cable that attaches the exterior door handle to the door lock actuator. Take that cable off and move it out of the way
Slide the door handle to the back and pull it out and swing it out towards the front of the car
